Saturday, November 6, 2010



it’s work as same as Canon MP 150 or MP 160,

This is the step :


Canon MP145


with the printer powered off but connected to a power source , you must:

1. Press stop/reset button, and then press [ON/OFF] button to restart

2. Press [ON/OFF] again and then press twice the stop/reset button.

3. Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green,

4. Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button.

5. Turn off the printer.( it must be turn off) and then turn it on again.


Use with your own risk ,

i’ll try this way and my Pixma MP145 not blink again.


The number of the Reset button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print

2 times Green EEPROM print

3 times Orange EEPROM reset

4 times Green Waste ink counter reset

5 Unplug cable power. (for MP145 / MP150)

6 Turn Off Power. (for MP160)



Error Code :


E2-2 = No paper (ASF)

E3-3 = Paper jam

E4 = No ink

E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly

E8 = Waste ink absorber full, or platen waste ink absorber full

E9 = The connected digital camera / video camera does not support Camera Direct Printing

E14 = The Ink cartridges whose destination are wrong

E15 = Ink cartridge is not installed

E16 – Ink remaining is unknown

E16 -E19 = Failed to scan head alignment sheet

E22 = Carriage error

E23 = Paper feed error

E24 = Purge unit error

E25 = ASF(cam) sensor error

E26 = Internal temperature rise error

E27 = Waste ink absorber full or platen waste ink absorber full

E28 = Ink cartridge temperature rise error -

E29 = EEPROM error

E33 = Paper feed position error

E35 15 = USB Host VBUD overcurrent error – USB

E37 17 = Abnormal motor driver error

E40 20 = Other hardware error

E42 22 = Scanner error

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.