Monday, October 18, 2010

software resetter for Canon iP1980/iP1900

Although software resetter for Canon iP1980 or canon iP1900 series not available now. Doesn’t mean there is no way to reset the printer. To reset Waste Ink Tank canon iP1980 or iP1900 series follow this steps:

1. Press Resume button hold for 1 – 2 minutes
2. Open the cover
3. Release the catridge and then put catridge again
4. Close The Cover
5. Turn Off
6. then Turn On again

Other solution :

Canon Pixma iP 1980 is just a successor of ip1880 parts and manuals are the same but a little bit faster than 1880

1. Use General Tool
2. Change USB port into Canon port
3. Click lock release
4. Click ip1800
5. Click device id
6. Clear waste ink counter by clicking main and platen
7. Check Eeprom box
8. Click Eeprom dump
9. Test pattern 1
10. Your done

But this is not the end of your problem, everytime you clear waste ink counter you have to open your printer and wash the ink pad and let it dry it will damage any part of your computer if you will not do this.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.