Pages

Tuesday, October 30, 2012

EPSON Stylus Photo R200/R210 Service Manual

EPSON Stylus Photo R200This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer. The instructions and procedures included herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.

Read More...

TM-T85/T85P operator’s guide

T85P operator’s guide
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Read More...

Epson Stylus Pro 4400/4800/4880 Error Codes

Epson Stylus Pro 4400/4800/4880 Error Codes
Maintenance Request Codes:

•0002 - CR Motor near end of life - Replace carriage return motor ASAP
•0006 - Battery shut off - Replace RTC back-up battery
•0040 - Cleaning unit near end of life - Replace cleaning unit ASAP
•0080 - Date not set - Set the date through the printer control panel
•0088 - RTC backup battery not installed - Install RTCbackup battery
•0100 - RTC backup battery pressure is temporally low - wait for a while
•0200 - The number of ASF paper feeding has reached predetermined value

Read More...

Epson T88IV Error LED indicators

Epson T88IV Error LED indicators
The printer recovers automatically when the cover is closed. Press on the center of the cover to ensure that it is closed. The printer recovers automatically when the print head cools. This is uncommon, but not an abnormality. Printer recovers with ESC/POS command DLE ENQ 1 or DLE ENQ 2 after removing jam.

Read More...